4S-14S Li-ion Battery BMS 12V-52V 30A Same Port 18650 Battery Pack Balance Protection Board for RV Large Trucks | MKBMS

Style: 4S-7S
Sale price$15.80


Product Description--

Charging current: ≤10A

Discharge current: 30A

Internal resistance: ≤15mΩ

Charging voltage:The number of Li-ion batteryin series connection X 4.2V
Wiring : Same Port


Overcharge protection——

Detection voltage: 4.25±0.025V

Detection delay: 1000±500MS

Release voltage: 4.15±0.05V

Over-discharge voltage protection——

Detection voltage: 2.75±0.1V

Detection delay: 1000±500MS

Release voltage: 3.0±0.1V

Balanced voltage——

Detection voltage: 4.15±0.025V

Detection delay: 100±50MS

Balance current: 42±5MA

Over discharge current protection——

Detection voltage: 50±15MV

Detection delay: 1000±500MS

Current protection: 50±8A

Short circuit protection--

Trigger condition: external short circuit

Detection delay: 300us

Release condition: disconnect the load

Temperature control protection——

Charge and discharge over-temperature protection: 55℃

Charge and discharge high temperature release temperature: 75℃

Release condition:During normal working temperature


Working power consumption: <35UA

Over-discharge power consumption(Sleeping State): <10UA

Operating temperature range: -30°~+80°C


Product Features--

  • Overcharge protection
  • Over discharge protection
  • Overcurrent protection
  • Balanced protection
  • Temperature control protection
  • Applicablefor 4S-7S / 8S-14S Li-ion battery



1* 4-7S BMS PCBA board
1*HY2.0 single head 8P line

Net weight:12.2g



1* 8-14S BMS PCBA board
1*HY2.0 single head 7P line
1*HY2.0 single head 8P line

Net weight:13.3g





1. It is strictly forbidden to insert balance wires into BMS before connecting batteries.Must make sure that the cable is soldered correctly first , and then connect the BMS board.

2. The sequence of connecting wires for BMS:

a.From thin black balance wire to stare, the 2ndwire(thin red wire)connect with the 1stbattery’s positive pole.Then connect each cell’s positive pole in order until the last one B+.
b.Please do not insert the plug directly after the cable is connected.Measure the voltage between each two adjacent metal terminals on the back of the plug. If it is a ternary polymer battery, the voltage should be between 3.0 ~4.2V, and the voltage of the iron-lithium battery should be between 2.0 ~3.6V. The voltage should be between 1.5~2.75V.
c.After confirming that the wiring sequence and voltage of the cables are correct, insert them into the socket of the protection board.

Attentionplease: The cables of different manufacturers are not universal, please make sure to use the matching cables.

3. After the wiring is completed, measure whether the voltage of battery B+and B- ,andthe voltage of B-and C- are equal. If they are equal, the protection board is working normally and can be used normally. If it is not equal, please check the wiring again.

Payment & Security

American Express Diners Club Discover JCB Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed