FSESC6.7 Dual Based on VESC6 Support Firmware Upgrade with Power Button

Flipsky Dual FSESC6.6 Plus(Pro swtich) based on Dual FSESC6.6 

FSESC6.7 Dual Based on VESC6 Support Firmware Upgrade with Power Button

Warm tips: please do not remove the shrink to protect the pcb electronics components from impurites or metals which result in short circuit or esc burnt damage.

Upgraded features:

• Pro switch version:
• Power on/off by pressing the button
• Added Can bus connector, be more convenient for 4WD set up
• Changed the USB port soldering process to SMT soldering instead of manual soldering
• Changed the big capacitors to SMT mounting capacitors ,and add more mosfets in the bottom side.

Spec:

- Hardware: V 6.6

- Firmware: Latest firmware version

- Voltage: 8V - 60V (Safe for 3S to 12S LiPo) for the dual ESC

- Voltage spikes may not exceed 60V

- Current: Continuous 100A single, total 200A ,  Instantaneous current 400A per single, total 800A for system instantaneous current. values depend on the mounting  and ambient temperature around the device!

- 5V 1.5A output for external electronics for single

- 3.3V 1A output for external electronics for single

- Modes: DC, BLDC, FOC (sinusoidal)

- Supported sensors: ABI, HALL, AS5047

-ERPM:150000

-Size: 78x78x20mm including heatsink 

-Motor wire: 12AWG

-Power cable:8AWG

-Recommend bullet connectors: 4MM bullet connector 

          -Reminder: Detected battery voltage tolerance: +/-0.6V 

The shipping package contains:

• 1*Dual FSESC6.6+Heatsink
• 2*VESC Sensor Wires
• 1*LED button 
• 1*Micro USB
• 1*Manual

Dual FSESC6.7 Wiring Diagram: